Monday, 19 January 2015

2015, the year that was....to finish what I've started!

 
It's been a while since I did a blog post huh! I had a couple of bad months with Menieres attacks which were pretty Hellish to live with, so I had to slow down or stop with the mini work side of things. Also, one side of my cabin was used to store stuff from the real house whilst we had workman in to do the kitchen and day room. The whole house needed gutting (when we moved in September 2013) and redecorating not to mention the electrics updating, new boiler and new double glazing etc, but I see light at the end of the tunnel now and we only have 2 more rooms to do! 

So I have my cabin back for me again! However, I'm running short on storage space, I think some of my friends were a little flabbergasted to hear that, given I've only had my cabin in use for less than a year (never say never!), in fairness it's partially down to me not finishing and thus dressing the projects I have because I wanted to either redo bits or finish adding the final touches, but mainly because I have a few started on projects and I had piles of their component pieces scattered around my work tops. :o/ 

One of my biggest irks is storing and finding (again) mini furniture, I have wasted too much time going through drawers looking for furniture pieces for projects and not knowing what's in what box, they all look the same! So now I write on every side of the box stating what's in it!  
This is my new storage. In total they hold 137 litres of stuff. They are great for anyone short of space especially if you don't have a proper work/craft space (or those greedy like me who doesn't have enough already!) as they are sturdy, tidy, move easily and stand alone units, easily fitted in a corner out of the way. However the larger one does not take 12x12 scrapbooking pages/books, so I've had to squash as many as I can in my Alex IKEA units. 
I've had 3 stacks taken off to make it lower...so it's hidden! lol
Hidden behind two shops! lol

Anyhow....I have done some mini work though over the months! That is I've have been working on Mr Mulpepper's!
Inside the building there really isn't enough space for a chimney breast, so I created a chimney breast outside from a piece of polystyrene.  I've shaped off the top for the tiles and lead trim.
I sealed the polystyrene with two coats of PVA (white glue) to make it super strong and for the plaster to adhere better.  Once dried, I applied my plaster and allowed to dry fully.
 I then started on the ageing of, not sure I'm as happy as I could be with this...so I may tweak it.  
No damp added as yet...only a little will be added if I do! I will show a photo  (at a later date) with the lead and tiles added to the stack! ;o) 
 The other side...
The front, minus main shop windows  etc.
 The chimney stack, I need to tweak the brick work and age the lead. ;o))
It took a while to cut and add the lead.  
 The chimney glued on...and the roof tiling begins.... 
 I still have just under half to finish off...the other side. ;o)
The brickwork needs some tweaks and maybe a little damp. The lead needs to be added around the chimney stack base and over the top of the roof tiles to create a watertight area!   
 The outside so far...it's had a few tweaks since I last showed it and glued the shop windows in... the two doors and upper windows acetate need to added etc.
The inner window shelves aren't glued in yet...I couldn't decide whether they should slope slighty like the real shop or left flat. 
The little roof has been tiled...in real life lead would be added along the wall and tiled edge...however the real building does not...hmmm undecided what to do here!
 The opening front panel has been wallpapered....no ageing applied as yet nor the windows and their frames.
I have a major irk with hinges showing, so I matched up the wallpaper to cover the hinges.
Then cut to size, if the architrave doesn't cover too well at least the hinges are covered. 
The interior wallpaper needs to be done, then the wooden skirting boards, cornice and window frames etc. 
I haven't managed to crack open a new kit because of the house stuff being stored in my cabin, but I have started on my terrace of 3 shops with the Brews and Stews B and B upstairs with the Twilfitt and Tatting's owners' sewing room above her shop. My main plan is to also resume work on my started projects (if you go back on my blog posts you'll see which ones and some photographed here too!) so I can dress them and thus regain storage space! Lol Well there's always hope! Where there's hope there's light at the end of that dark and gloomy tunnel! ;o)
My Sister bought me some more pretties for my cabin...the hanging paper lantern and the little fabric daisy above the hanging narrow cabinet by the window.  
 The sky over Norfolk late 2014...
I couldn't resist a photo of it!

Happy New Year 2015!

I hope you don’t mind my ramblings and madness! :o))

Michelle xxxx

Tuesday, 2 September 2014

Mr Mulpepper's Apothecary - Update

Well I'm here with an update on Mr Mupepper's, the other apothecary in Diagon Alley.  I won't be doing it the same as Slug and Jiggers, that was from my own imagination and nothing like the real one, however, Mr Mulpepper's will be as much like the real one as I can do it and with what I have to work with! ;o) 
So, this is the old Honeychurch shop that I had and stripped back. Firstly, sticking with what you first thought was right...is nearly always the right choice! lol The fascia blue is the wrong blue for the shop and the one I bought purposely, was...worse still I had actually started to paint the top window frames too! The nightmare began with the window frames and the sanding down (again lol) and erm trying to glue them back together! 
Enough of that for now! I glued on the shops' sign etc which I also wanted to change, so it had a little roof over the top of it...the challenge began! I also started to put together the two bottom bay windows and made adaptions to them too. 
I wanted something more fancy for the window frames, but the narrow trim I had (and could only use) was quite thin and I needed more depth so they stood out from the plaster work.  So I used the basic trim that came with the shop and fitted my fancy trim over the top.  
 The basic trim glued on!
 Now the fancy trim over the top with an enhanced window sill too! ;o)
Now it came to that tricky little roof addition...not forgetting the nightmare top window fitment! They took ages, AGES to refit back into the window holes, a couple aren't great...looking at them makes one feel you are on a wonky fair ground attraction! lol 
Arh! Yes, its upside down! lol I did have 2 spare window brackets but they were too small and really needed two per window. So I opted for one large one per window, and as it happened when I rechecked with the real shop, they too had one large bracket! YAY! ;o) 
 Now for adding the tiny roof above the sign......I couldn't have much of a slope!
The roof part added and some trim to embellish it. painted and distressed too. :o) I also drew on grid lines for my brick lines...so that they aligned and were fairly straight.
I decided to glue the door architrave on  before I started on the plaster work...with fine and tight areas it's far easier to have it in situ as you plaster etc.
I had to cut a little niche out of the main door architrave so I could accommodate the window ledge.
I only wanted patches of exposed brickwork, this can be tricky because if you want realistic and straight lines, you do want them straight and the grid lines help...especially when you have two separate segments. 
 With all the brickwork added, I then painted them! Still a way to go yet! 
Here I am starting to apply the plaster. I chose to draw around the bay windows for the basic shape because I didn't want these glued in yet, as you find out later(!) and the fact plaster is also messy work and I much harder to clean off ones painted pieces! 
 Some of the ageing and distress applied to the plaster and brickwork...

The round gap in the plaster (top half) is where my outside light will go. More on that in my next post!
I have added some damp patches, but not much. I may add more when the bay windows are glued in. 
I may need to add a few touch-ins with the plaster and there are a couple of areas higher up that I want to tweak too! 
Testing everything in situ! The bay windows have 2 shelves each (I made these originally and now I've tweaked them so they will refit the windows again).  I am still deciding whether to have these sloping towards the front (like the real shop) or flat! 
I've stripped all the old roof tiles off. I have added bricks to both sides of the roof and the chimney stack. I have also aged the chimney pots...I forgot to take a photo of them! Grrrr! lol I will be adding trim to the sides to finish off the edge. The tiles and lead flashing are on order for both roof's. 
 I needed to tidy and finish off the side of my little sloping roof! 
I have also cut and primed all the interior trims/architrave. These will be painted the aged with that I normally use...I'm doubtful I will have either the blue or plum inside! ;o/ 
I will be using the same trim as the exterior for the interior around the doors and their windows at least. Again, these will be an aged white that I use.
The door window frame that I made, which the acetate will be sandwiched in between the door and frame. It still needs to be distressed and I will make frames for the upper windows too, but without the thin outside frame as the wider and proper architrave will be used for that part.   

Supplies are on order to finish the exterior. I have also bought all the wallpapers and many for other projects too. I've been collecting furniture etc too! Once the exterior is completed, I will make a start on the terrace of shops. I will show an update on this before I start on the latter. ;o)) I will then start the process of popping back to started projects when I am waiting on major or big things to dry. ;o)   

We are having our current kitchen completely gutted and redone in a few weeks...yes,  the real home is still being done too! Can you believe it, that I moved to Norfolk a year ago today! My oh my, what a year! lol ;o))  


I hope you don’t mind my ramblings and madness! :o))

Michelle xxxx 

Tuesday, 22 July 2014

Prepping, priming and planning!

It's been a while huh, but a little update for now! Did you think I took a trip to the moon or an exotic holiday somewhere?! Hmmmm......I could have done, I've also been busy working on many projects and buying supplies etc! :o)) 

I've been stripping back all the part started kits, insides and outsides as well as all the component parts. Two I bought like it, one I wanted to completely re-do and one was brand new. Although it may not look like it, but it's taken hours of work and hard work to to get this far! Heat gun, hot soapy water to remove wallpaper, wires and lighting removed and sanding both hand and electric sanding and then lots and lots of priming! All my part started kits are on a level playing field, it means I can go from one to the other with ease. I have a total of 8 projects/shops that I can work on now. I have decided to leave the more complicated shops till last...namely Ollivanders and Weasley Wizard Wheezes (which is part started).
This is Dogweed and Deathcap shop that I've applied the stone work to. I was going to change the colour, but this is natural sandstone dust and all it needs is some more distressing and also ageing and dirtying, so I may not paint it. 
 I applied another coat to the steps...still very much work in progress!

I've prepped all the terrace shops, both inside and out....plus most of the add on pieces. I've also sorted out all the shops detailing and components to their rightful shops. I have changed a couple of the doors..so I have 3 different doors to the shops. 
The middle shop has a lovely deep bay window which I will add Georgian bars to. 
I've made some changes to Leaky Cauldron pub. in the films all  you see is a black Georgian door (set on a corner), but the inside is Tudor. So, I've changed the outside to emulate a Georgian look, but the inside is clearly Tudor. This was part of my original Hogwarts which was part of a Tudor Coach House kit, so it already has the low ceilings! lol 
This was my Victorian Shop which was my first ever project. It was mostly done by my parents, but I did do some of it. This has taken hours of prep work, I have no idea what glue was used, but suffice to say I'm pretty sure some parts doubled as giant glue sticks! If it wasn't glued within an inch of its life, then it was pinned! lol I still have to sand down the floors and completely redo the roof...suffice to say it has a long way to go....  

It is to become Mr Mulpepper's apothecary.
It was impossible to rip out the staircase without breaking it, so it's been a case of working around it! I've removed the homemade doors (the shop didn't come with any) and the doorways aren't quite today's 1/12th scale size, so I will add all false doors and thus cover up the original doorways. I've also been distressing the hall way as you see here. The staircase still needs a lot more work  yet.
 Still lots to do...the outside(s) first though!
I've changed and embellished the bay windows to the shop too, these now emulate the real shop ones. If you look at my page called Mr Mulpepper's Apothecary you will see how it once looked (before I stripped it back!).
Still very much work in progress! The Georgian bars are not glued in, the actual bays needs painting plum too! The doors need lots of work, not to mention dirtying! lol The top of the shop (lintel?) has been dirtied over the white primer...I'm hoping when it's painted the dirty white will show through when I distress it...an experiment!
This old Honeychurch shop didn't have much refinement, so I'm reapplying the inner window frames. This still needs to be worked on and painted plum, the acetate will be sandwiched in-between.  
 I hope to add a more fancy architrave around the doors too...
Most of the shops in Diagon Alley have other businesses above the downstairs shops. This shop has upper blue windows...so mine will too. I have around 5 different businesses to be added to various shops along my Alley. You will have to wait and see what they are though! ;o)
I have bought most of my paints for my shops...I still have a few more to buy. Chalk paints are so much easier to distress than acrylic paints, they also come in a wonderful range of colours that are more pertinent to the eras I am working on. I have also bought wallpapers, and interior fittings as well as carts on wheels (I had these made) for my alley.
Some hanging shops signs that I have....I have 3 of these and I hope to have other designs too. 

I have a new project (I have the kit) that I hope to have built before Christmas...if only to see what supplies I need to buy. It's a Gothic style with a very opulent interior, you'll have to wait and see what theme it will take, and no it's not witchy or wizard related! lol

Nearly 3 weeks ago I very badly injured my foot and ankle. I really have no idea how long it will take to heal and I'm not able to spend more than 3 hours being up and about, so work (when I'm not working, my job that pays the bills lol!) will be slower! I will be back when I have progressed more! 

I hope you don’t mind my ramblings and madness! :o))

Michelle xxxx